FACIAL-FLEX

Should your Facial-Flex^®device snap apart into two pieces,
it's much simpler to put back together than what first seems apparent.

How to Re-assemble

PART A PART B

TERMS

1 – Base
2 – Bar
3 – Bead
4 – Ball & Groove

1.Identify Parts A & B and familiarize yourself with the reference terms. Position the parts in front of you the exact same way.

2. Hold Part A by the base in your left hand so that the bar is pointing to the right and the groove in the "ball & groove" is facing you.

3. Hold Part B by the base in your right hand so that the bar is pointing to the left and the groove in the "ball & groove" is facing you.

4. Hold both pieces horizontally and touch them together as you would touch your index fingers together.

5. Turn your right hand 90° (a quarter turn) away from you so that the groove in the "ball & groove" is facing the ceiling.

6. Move Part B (piece in right hand) to the left so that the bar of Part A is resting in the groove of the "ball & groove" of Part B.

7. Extend the index finger of your left hand and brace under the "ball & groove" of Part B. Then apply pressure with the thumb of your left hand on the bar of Part A until the bar snaps into the groove of the "ball & groove" of Part B.

8.Rotate your right hand 90° (a quarter turn) towards you so that the bar of Part B is resting in the groove of the "ball & groove" of Part A.

9.Extend the index finger of your left hand and brace behind the "ball & groove" of Part A. Then apply pressure with the thumb of your left hand on the bar of Part B until the bar snaps into the groove of the "ball & groove" of Part A.

Your Facial-Flex^® should now be reassembled.

If you have any comments or further questions,
Please call us at (800) 469-3539 or (610) 539-5869