Flex-BandsTM
Your Facial-Flex system includes a supply
of 6 oz. and 8 oz. replacement Flex-Bands.
These elastic bands and a reorder booklet
are located in the molded lid of your carrying
case. First time users should find the 6
oz. resistance Flex-Bands adequate. As you
become comfortable with the exercise and
use of the device, you will need a higher
resistance to continue your progress. Changing
to a higher resistance Flex-Band challenges
your muscles, increasing their strength
and tone at a faster rate. Flex-Bands are
available in an even higher strength of
14 ozs. of resistance. Flex-Bands can be
purchased from your distributor or directly
from Facial Concepts, Inc.
Remove the existing
band by pulling it off the mounts located
on top of the center abutments.
Install the new Flex-Band by stretching
the band over the mounts located on top
of the center abutments. Make sure that
the band is positioned properly on both
mounts, and that no binding occurs when
you compress Facial-Flex between your fingers.
Replacing Flex-Bands™
For optimum results,
the Flex-Band™on your Facial-Flex®
should be changed weekly!
This is important
to achieve best results. The bands fatigue
and the resistance decreases with use.
|
